{"title":"Rolling shutter camera","description":"","products":[{"product_id":"usb3-0-camera-12-2mp-color-sony-imx226-mer2-1220-32u3c","title":"MER2-1220-32U3C, IMX226, 4024x3036, 32fps, 1\/1.7 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 \u003ca href=\"\/en-gb\/collections\/camera-usb3-vision\"\u003eUSB3.0 camera\u003c\/a\u003e is an industrial vision camera, with an USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions (29x29x29mm)\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitve pixels. Providing you an excellent image quality.\u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003cbr\u003e\u003cbr\u003eIf you don’t use the I\/O port, it is possible to order the camera without I\/O. For high volumes, this will reduce the cost price of the camera with € 10. The minimum order quantity for an industrial USB3 camera without I\/O is 10 pieces. If you want to order the industrial USB3 camera without I\/O, please contact us.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442508144774,"sku":"MER2-1220-32U3C","price":252.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442508177542,"sku":"MER2-1220-32U3C-M01","price":252.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-32U3C_Camera_USB3_Vision_1_02b9aa6c-fdb2-483b-97bb-4450bb29c4e7.webp?v=1759568735"},{"product_id":"usb3-0-camera-rightangle-12mp-color-sony-imx226-mer2-1220-32u3c-w90","title":"MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1\/1.7 inch, Rolling shutter, Right angle (90), Color","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera with 90 degree head IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2 \u003ca href=\"\/en-gb\/collections\/camera-usb3-vision\"\u003eUSB3.0 camera\u003c\/a\u003e is an industrial vision camera, with an USB 3.0 interface and a 90 degree camera head. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions due to 90 degree right angle head\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitve pixels. Providing you an excellent image quality.  \u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276034023558,"sku":"MER2-1220-32U3C-W90","price":287.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-32U3C-W90_Camera_USB3_Vision_1_a1c7bb93-1f3e-417d-a712-61d1687a1572.webp?v=1759568729"},{"product_id":"usb-camera-3-0-12-2mp-monochrome-sony-imx226-mer2-1220-32u3m","title":"MER2-1220-32U3M, IMX226, 4024x3036, 32fps, 1\/1.7 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 \u003ca href=\"\/en-gb\/collections\/camera-usb3-vision\"\u003eUSB 3.0 camera\u003c\/a\u003e is an industrial vision camera, with an USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions (29x29x29mm)\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial monochrome \/ black\u0026amp;white camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of (industrial) applications. While the market for security and telephony focusses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are up to 3 times more lightsensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. \u003cspan style=\"mso-ansi-language: EN-GB;\" lang=\"EN-GB\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca title=\"Hardware trigger cameras\" href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003cbr\u003e\u003cbr\u003eIf you don’t use the I\/O port, it is possible to order the camera without I\/O. For high volumes, this will reduce the cost price of the camera with € 10. The minimum order quantity for an industrial USB3 camera without I\/O is 10 pieces. If you want to order the industrial USB3 camera without I\/O, please contact us.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442513223814,"sku":"MER2-1220-32U3M","price":252.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442513256582,"sku":"MER2-1220-32U3M-M01","price":252.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-32U3M_Camera_USB3_Vision_1_03b2c244-6eff-406a-a0ce-0f3f9bd3b5a1.webp?v=1759568723"},{"product_id":"rightangle-usb3-camera12mp-monochrome-sony-imx226-mer2-1220-32u3m-w90","title":"MER2-1220-32U3M-W90, IMX226, 4024x3036, 32fps, 1\/1.7 inch, Rolling shutter, Right angle (90), Mono","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera with 90 degree head IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2 \u003ca href=\"\/en-gb\/collections\/camera-usb3-vision\"\u003eUSB3.0 camera\u003c\/a\u003e is an industrial vision camera, with an USB 3.0 interface and a 90 degree camera head. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions due to 90-degree right angle head\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial monochrome \/ black\u0026amp;white camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of (industrial) applications. While the market for security and telephony focusses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are up to 3 times more lightsensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276034089094,"sku":"MER2-1220-32U3M-W90","price":287.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-32U3M-W90_Camera_USB3_Vision_1_f7ec77a2-6b4e-4d37-8483-653fd5e223bf.webp?v=1759568377"},{"product_id":"12-2mp-gige-machine-vision-camera-color-sony-imx226-mer2-1220-9gc","title":"MER2-1220-9GC, IMX226, 4024x3036, 9fps, 1\/1.7 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: -    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eIndustrial GigE camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442680012934,"sku":"MER2-1220-9GC","price":280.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442680045702,"sku":"MER2-1220-9GC-M01","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-9GC_Camera_GigE_Vision_1_4c40dafb-3b30-4e0c-b906-5d964e81c31e.webp?v=1759568370"},{"product_id":"12mp-gige-machine-vision-camera-poe-color-sony-imx226-mer2-1220-9gc-p","title":"MER2-1220-9GC-P, IMX226 , 4024x3036, 9fps, 1\/1.7 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x40.3mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: -    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eIndustrial GigE camera with PoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I\/O. When I\/O is required in an application we advise to supply the camera via a I\/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I\/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442684502150,"sku":"MER2-1220-9GC-P","price":290.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442684534918,"sku":"MER2-1220-9GC-P-M01","price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-9GC-P_Camera_GigE_Vision_1_33242874-5194-4f3c-943b-c0dcd8705b06.webp?v=1759568362"},{"product_id":"gige-vision-camera-12-2mp-monochrome-sony-imx226-mer2-1220-9gm","title":"MER2-1220-9GM, IMX226, 4024x3036, 9fps, 1\/1.7 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions: -    An industrial camera -    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial GigE Vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome industrial camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for image processing. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eIndustrial camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442688139398,"sku":"MER2-1220-9GM","price":280.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442688172166,"sku":"MER2-1220-9GM-M01","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-9GM_Camera_GigE_Vision_1_c55e4333-da0d-4633-aea7-520a46ddb122.webp?v=1759568349"},{"product_id":"gige-vision-poe-camera-12mp-monochrome-sony-imx226-mer2-1220-9gm-p","title":"MER2-1220-9GM-P, IMX226 , 4024x3036, 9fps, 1\/1.7 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 \u003ca href=\"\/en-gb\/collections\/camera-gige-vision\" title=\"GigE Camera\"\u003eGigE camera\u003c\/a\u003e series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x40.3mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial GigE Vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome industrial camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for image processing. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eIndustrial camera with PoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I\/O. When I\/O is required in an application, we advise supplying the camera via a I\/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I\/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442688401542,"sku":"MER2-1220-9GM-P","price":290.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442688434310,"sku":"MER2-1220-9GM-P-M01","price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-1220-9GM-P_Camera_GigE_Vision_1_79b1980c-b164-4d59-a0a3-bb678ad58839.webp?v=1759568341"},{"product_id":"usb3-0-camera-20mp-color-sony-imx183-mer2-2000-19u3c","title":"MER2-2000-19U3C, IMX183, 5496x3672, 19fps, 1 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera IMX183\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2 \u003ca href=\"\/en-gb\/collections\/camera-usb3-vision\"\u003eUSB3.0 camera\u003c\/a\u003e is an industrial vision camera, with an USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions (29x29x29mm)\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitve pixels. Providing you an excellent image quality.\u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003cbr\u003e\u003cbr\u003eIf you don’t use the I\/O port, it is possible to order the camera without I\/O. For high volumes, this will reduce the cost price of the camera with € 10. The minimum order quantity for an industrial USB3 camera without I\/O is 10 pieces. If you want to order the industrial USB3 camera without I\/O, please contact us.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-Mount","offer_id":41442533671046,"sku":"MER2-2000-19U3C","price":419.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442533703814,"sku":"MER2-2000-19U3C-M01","price":419.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-19U3C_Camera_USB3_Vision_1_7e525501-41f9-4272-b922-ec892f75a98c.webp?v=1759568244"},{"product_id":"usb3-0-camera-rightangle-20mp-color-sony-imx183-mer2-2000-19u3c-w90","title":"MER2-2000-19U3C-W90, IMX183, 5496x3672, 19fps, 1 inch, Rolling shutter, Right angle (90), Color","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera with 90 degree head\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 USB3.0 camera is an industrial vision camera, with a USB 3.0 interface and a 90 degree camera head. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions due to 90 degree right angle head\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitve pixels. Providing you an excellent image quality.  \u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276034809990,"sku":"MER2-2000-19U3C-W90","price":434.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-19U3C-W90_Camera_USB3_Vision_1_f0a222e8-c8d7-47b0-85ce-22e73b38137c.webp?v=1759568234"},{"product_id":"usb-camera-3-0-20mp-monochrome-sony-imx183-mer2-2000-19u3m","title":"MER2-2000-19U3M, IMX183, 5496x3672, 19fps, 1 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2 \u003ca href=\"\/en-gb\/collections\/camera-usb3-vision\"\u003eUSB3.0 camera\u003c\/a\u003e is an industrial vision camera, with a USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions (29x29x29mm)\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial monochrome \/ black\u0026amp;white camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of (industrial) applications. While the market for security and telephony focusses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are up to 3 times more lightsensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color light source and lens filter, extra contrast in the image is created. The industrial monochrome camera captures images with high contrast and resolution.  \u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003cbr\u003e\u003cbr\u003eIf you don’t use the I\/O port, it is possible to order the camera without I\/O. For high volumes, this will reduce the cost price of the camera with € 10. The minimum order quantity for an industrial USB3 camera without I\/O is 10 pieces. If you want to order the industrial USB3 camera without I\/O, please contact us.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442535735430,"sku":"MER2-2000-19U3M","price":419.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442535768198,"sku":"MER2-2000-19U3M-M01","price":419.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-19U3M_Camera_USB3_Vision_1_50fec748-fd77-4361-987f-7a1ae3e19da3.webp?v=1759568226"},{"product_id":"rightangle-usb3-camera20mp-monochrome-sony-imx183-mer2-2000-19u3m-w90","title":"MER2-2000-19U3M-W90, IMX183, 5496x3672, 19fps, 1 inch, Rolling shutter, Right angle (90), Mono","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera with 90 degree head IMX183\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2 \u003ca href=\"\/en-gb\/collections\/camera-usb3-vision\" title=\"USB3 camera\"\u003eUSB3.0 camera\u003c\/a\u003e is an industrial vision camera, with a USB 3.0 interface and a 90 degree camerahead. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions due to 90 degree right angle head\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial monochrome \/ black\u0026amp;white camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of (industrial) applications. While the market for security and telephony focusses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are up to 3 times more lightsensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color light source and lens filter, extra contrast in the image is created. The industrial monochrome camera captures images with high contrast and resolution.  \u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276034875526,"sku":"MER2-2000-19U3M-W90","price":434.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-19U3M-W90_Camera_USB3_Vision_1_a5a434f0-d74c-4d28-8c0e-99d4dd9f54da.webp?v=1759568218"},{"product_id":"20mp-gige-machine-vision-camera-color-sony-imx183-mer2-2000-6gc","title":"MER2-2000-6GC, IMX183, 5496x3672, 6fps, 1 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera IMX183\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 \u003ca href=\"\/en-gb\/collections\/camera-gige-vision\" title=\"GigE Camera\"\u003eGigE camera\u003c\/a\u003e series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: -    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eIndustrial GigE camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442894708870,"sku":"MER2-2000-6GC","price":461.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442894741638,"sku":"MER2-2000-6GC-M01","price":461.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-6GC_Camera_GigE_Vision_1_29f88567-24cf-40a6-bfca-4f225722de9d.webp?v=1759568209"},{"product_id":"20mp-gige-machine-vision-camera-poe-color-sony-imx183-mer2-2000-6gc-p","title":"MER2-2000-6GC-P, IMX183, 5496x3672, 6fps, 1 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera IMX183\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 \u003ca href=\"\/en-gb\/collections\/camera-gige-vision\" title=\"GigE Camera\"\u003eGigE camera\u003c\/a\u003e series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x40.3mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: -    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eindustrial GigE camera with PoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I\/O. When I\/O is required in an application we advise to supply the camera via a I\/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I\/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442895954054,"sku":"MER2-2000-6GC-P","price":472.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442895986822,"sku":"MER2-2000-6GC-P-M01","price":472.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-6GC-P_Camera_GigE_Vision_1_4a7d4427-bca9-4763-b663-0acfe126e69f.webp?v=1759568201"},{"product_id":"gige-vision-camera-20mp-monochrome-sony-imx183-mer2-2000-6gm","title":"MER2-2000-6GM, IMX183, 5496x3672, 6fps, 1 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera IMX183\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003c\/p\u003e\n\u003cp\u003e-    An industrial camera\u003c\/p\u003e\n\u003cp\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial GigE Vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome industrial camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for image processing. By selecting the right color as your light source and lens filter, a black and white camera can utilize the product in its characteristics. Images with a large contrast and a high resolution can be created with an industrial monochrome camera.\u003c\/p\u003e\n\u003ch2\u003eIndustrial camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442898575494,"sku":"MER2-2000-6GM","price":461.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442898608262,"sku":"MER2-2000-6GM-M01","price":461.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-6GM_Camera_GigE_Vision_1_fb9b813a-7d7c-4f41-ade4-7e4ac4f1688b.webp?v=1759568187"},{"product_id":"gige-vision-poe-camera-20mp-monochrome-sony-imx183-mer2-2000-6gm-p","title":"MER2-2000-6GM-P, IMX183, 5496x3672, 6fps, 1 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera IMX183\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x40.3mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial GigE Vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome industrial camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for image processing. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eIndustrial camera with PoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I\/O. When I\/O is required in an application we advise to supply the camera via a I\/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I\/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442901885062,"sku":"MER2-2000-6GM-P","price":472.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442901917830,"sku":"MER2-2000-6GM-P-M01","price":472.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-2000-6GM-P_Camera_GigE_Vision_1_43ef9b81-6847-4344-8a91-770f1f0a42ad.webp?v=1759568179"},{"product_id":"5mp-gige-machine-vision-camera-color-on-semi-ar0521-mer2-507-23gc","title":"MER2-507-23GC, AR0521, 2592x1944, 23fps, 1\/2.5 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera \u003cspan\u003eOnSemi AR0521\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eindustrial GigE camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442959655046,"sku":"MER2-507-23GC","price":220.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442959687814,"sku":"MER2-507-23GC-M01","price":220.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-507-23GC_Camera_GigE_Vision_1_b832540d-599a-4f47-a5d8-9f2a5e99dba6.webp?v=1759567873"},{"product_id":"gige-vision-camera-5mp-monochrome-nir-onsemi-ar0522-mer2-507-23gm-nir","title":"MER2-507-23GM-NIR, AR0522, 2592x1944, 23fps, 1\/2.5 inch, Rolling shutter, CMOS, Mono NIR","description":"\u003ch2\u003eGigE Vision Camera \u003cspan\u003eOnSemi AR0522\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The camera is available with and without Power over Ethernet (PoE).\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Only one cable is required to connect the device (in case of PoE)\u003cbr\u003e-    Dimensions are: 29x29x29mm (without PoE), 29x29x38 mm (with PoE)\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eNIR\u003c\/h2\u003e\n\u003cp\u003eNIR cameras are monochrome sensors that are specially developed for the Near Infrared Region. These are the wavelengths from 800-1000nM. Normal IR LEDs operate at 850nM or 930nM. The photon sensitive parts of the pixel of a NIR camera are deeper than of the standard monochrome camera, therefore they are better able to catch the photons of the higher wave lengths (800-1000nM). NIR sensors are more expensive than standard monochrome camera’s. These cameras are ideal for low light applications, like intelligent transport systems (ITS) and medical imaging. \u003c\/p\u003e\n\u003ch2\u003eIndustrial GigE camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-Mount","offer_id":41442965356678,"sku":"MER2-507-23GM-NIR","price":267.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442965389446,"sku":"MER2-507-23GM-NIR-M01","price":267.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-507-23GM-NIR_Camera_GigE_Vision_1_3c25b3ab-9559-47d8-a43b-12b6adf9ac63.webp?v=1759567865"},{"product_id":"gige-vision-poe-camera-5mp-monochrome-onsemi-ar0521-mer2-507-23gm-p","title":"MER2-507-23GM-P, AR0521, 2592x1944, 23fps, 1\/2.5 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera \u003cspan\u003eOnSemi AR0521\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The camera is available with and without Power over Ethernet (PoE).\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Only one cable is required to connect the device (in case of PoE)\u003cbr\u003e-    Dimensions are: 29x29x29mm (without PoE), 29x29x38 mm (with PoE)\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color as your light source and lens filter, a black and white camera can utilize the product in its characteristics. The MER2-507-23GM-P, AR0521 is capable of producing high-quality images with a large contrast and exceptional resolution.\u003c\/p\u003e\n\u003ch2\u003ePoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is invented to supply both power and data over a single standard ethernet cable. This can reduce the cabling and installing time in applications where no hardware trigger or I\/O is required. When I\/O is used in an application, we advise supplying the camera voltage using the I\/O connector. Power over Ethernet consumes more power than power by the I\/O connector. The GigE camera will get warmer using PoE, because the voltage of the PoE line must be converted to a lower voltage, resulting in heat generation. A PoE GigE camera is also larger than the version without PoE because an additional board is required to extract the power from the ethernet connector and convert the voltage to a lower voltage level. Due to the extra hardware required, the price of a PoE GigE camera is also higher than the version without PoE.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442967093382,"sku":"MER2-507-23GM-P","price":230.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442967126150,"sku":"MER2-507-23GM-P-M01","price":230.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-507-23GM-P_Camera_GigE_Vision_1_47a6d2ab-7134-4058-9060-0c4be9473b61.webp?v=1759567857"},{"product_id":"gige-vision-poe-camera-5mp-monochrome-nir-onsemi-ar0522-mer2-507-23gm-p-nir","title":"MER2-507-23GM-P-NIR, AR0522, 2592x1944, 23fps, 1\/2.5 inch, Rolling shutter, CMOS, Mono NIR","description":"\u003ch2\u003eGigE Vision Camera \u003cspan\u003eOnSemi AR0522\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The camera is available with and without Power over Ethernet (PoE).\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Only one cable is required to connect the device (in case of PoE)\u003cbr\u003e-    Dimensions are: 29x29x29mm (without PoE), 29x29x38 mm (with PoE)\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eNIR\u003c\/h2\u003e\n\u003cp\u003eNIR cameras are monochrome sensors that are specially developed for the Near Infrared Region. These are the wavelengths from 800-1000nM. Normal IR LEDs operate at 850nM or 930nM. The photon sensitive parts of the pixel of a NIR camera are deeper than of the standard monochrome camera, therefore they are better able to catch the photons of the higher wave lengths (800-1000nM). NIR sensors are more expensive than standard monochrome camera’s. These cameras are ideal for low light applications, like intelligent transport systems (ITS) and medical imaging.  \u003c\/p\u003e\n\u003ch2\u003ePoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is invented to supply both power and data over a single standard ethernet cable. This can reduce the cabling and installing time in applications where no hardware trigger or I\/O is required. When I\/O is used in an application, we advise supplying the camera voltage using the I\/O connector. Power over Ethernet consumes more power than power by the I\/O connector. The GigE camera will get warmer using PoE, because the voltage of the PoE line must be converted to a lower voltage, resulting in heat generation. A PoE GigE camera is also larger then the version without PoE because an additional board is required to extract the power from the ethernet connector and convert the voltage to a lower voltage level. Due to the extra hardware required, the price of a PoE GigE camera is also higher than the version without PoE.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442968240262,"sku":"MER2-507-23GM-P-NIR","price":278.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442968273030,"sku":"MER2-507-23GM-P-NIR-M01","price":278.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-507-23GM-P-NIR_Camera_GigE_Vision_1_5e80e90d-6130-40f9-ab47-a3e767afe804.webp?v=1759567848"},{"product_id":"6-3mp-gige-machine-vision-camera-color-sony-imx178-mer2-630-18gc","title":"MER2-630-18GC, IMX178, 3088x2064, 18fps, 1\/1.8 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: -    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eIndustrial GigE camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442969649286,"sku":"MER2-630-18GC","price":250.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442969682054,"sku":"MER2-630-18GC-M01","price":250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-18GC_Camera_GigE_Vision_1_7d5fa7da-6641-4de1-bd5c-baf9cbd64033.webp?v=1759567838"},{"product_id":"6-3mp-gige-machine-vision-camera-poe-color-sony-imx178-mer2-630-18gc-p","title":"MER2-630-18GC-P, IMX178, 3088x2064, 18fps, 1\/1.8 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x40.3mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: -    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eIndustrial GigE camera with PoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I\/O. When I\/O is required in an application, we advise supplying the camera via a I\/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I\/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442972139654,"sku":"MER2-630-18GC-P","price":261.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442972172422,"sku":"MER2-630-18GC-P-M01","price":261.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-18GC-P_Camera_GigE_Vision_1_17eafd59-25ab-4b21-bf73-2b11b75b14dd.webp?v=1759567831"},{"product_id":"gige-vision-camera-6-3mp-monochrome-sony-imx178-mer2-630-18gm","title":"MER2-630-18GM, IMX178, 3088x2064, 18fps, 1\/1.8 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial GigE Vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome industrial camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for image processing. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eIndustrial camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442973810822,"sku":"MER2-630-18GM","price":250.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442973843590,"sku":"MER2-630-18GM-M01","price":250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-18GM_Camera_GigE_Vision_1_d0bedc47-5c65-4ac4-93a3-3f3db395ed06.webp?v=1759567816"},{"product_id":"gige-vision-poe-camera-6-3mp-monochrome-sony-imx178-mer2-630-18gm-p","title":"MER2-630-18GM-P, IMX178, 3088x2064, 18fps, 1\/1.8 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications.  The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x40.3mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial GigE Vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome industrial camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for image processing. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eIndustrial camera with PoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I\/O. When I\/O is required in an application we advise supplying the camera via a I\/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I\/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442975383686,"sku":"MER2-630-18GM-P","price":261.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442975416454,"sku":"MER2-630-18GM-P-M01","price":261.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-18GM-P_Camera_GigE_Vision_1_72729769-63d8-4f22-b638-71f6ca829f73.webp?v=1759567807"},{"product_id":"usb3-0-camera-6-3mp-color-sony-imx178-mer2-630-60u3c","title":"MER2-630-60U3C, IMX178, 3088x2064, 60fps, 1\/1.8 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 USB3.0 camera is an industrial vision camera, with an USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions (29x29x29mm)\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003cbr\u003e\u003cbr\u003eIf you don’t use the I\/O port, it is possible to order the camera without I\/O. For high volumes, this will reduce the cost price of the camera with € 10. The minimum order quantity for an industrial USB3 camera without I\/O is 10 pieces. If you want to order the industrial USB3 camera without I\/O, please contact us.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442607988870,"sku":"MER2-630-60U3C","price":201.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442608021638,"sku":"MER2-630-60U3C-M01","price":201.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-60U3C_Camera_USB3_Vision_1_da8d21df-29e2-4ee9-aaeb-2943562cc00c.webp?v=1759567791"},{"product_id":"mer2-630-60u3c-devkit","title":"MER2-630-60U3C-DEVKIT, 6.3MP, Rolling shutter, Color, incl. F1.4 12mm C-mount lens","description":"\u003ch2\u003eHigh resolution camera development kit deal\u003c\/h2\u003eThis development kit includes:\u003cul\u003e\t\u003cli\u003e\n\u003ca href=\"\/en-gb\/products\/usb3-0-camera-6-3mp-color-sony-imx178-mer2-630-60u3c\"\u003eMER2-630-60U3C\u003c\/a\u003e: Industrial camera with high sensitive Sony IMX178 image sensor, 3088x2064 pixels, 60fps, 1\/1.8\", Rolling shutter, Color, C-mount\u003c\/li\u003e\t\u003cli\u003e\n\u003ca href=\"\/en-gb\/products\/lens-m12-5mp-16mm-f2-0-1-2-va-lm12-5mp-16mm-f2-0-020\"\u003eVA-LCM-5MP-12MM-F1.4-015\u003c\/a\u003e: C-mount lens 12mm\u003c\/li\u003e\t\u003cli\u003e3M USB3 screwlock cable\u003c\/li\u003e\t\u003cli\u003eShipping within 1 week\u003c\/li\u003e\n\u003c\/ul\u003e\u003cem\u003eMake sure to use code \u003c\/em\u003eDEVKITDISCOUNT \u003cem\u003eat checkout for free handling (1 weeks delivery time). 1 set per customer. If additional goods are ordered, an additional handling fee of €49,00 is applicable and the delivery time will be 3-4 weeks. Only prepayment, on account not possible.\u003c\/em\u003e\u003ch2\u003eCamera information\u003c\/h2\u003eThe Mercury 2 USB3.0 camera is an industrial vision camera, with an USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi 3, Raspberry Pi 4, NVIDIA Jetson TX1, TX2, Nano and Xavier and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions (29x29x29mm)\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003cbr\u003e \u003ctable class=\"ps-custom-table\"\u003e\t\u003cthead\u003e\t\t\u003ctr\u003e\t\t\t\u003cth style=\"text-align: left;\"\u003eSpecification\u003c\/th\u003e\t\t\t\u003cth style=\"text-align: left;\"\u003eMER2-630-60U3C\u003c\/th\u003e\t\t\u003c\/tr\u003e\t\u003c\/thead\u003e\t\u003ctbody\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eColor\/Mono\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eColor\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eResolution\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e3088x2064\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eSensor Type\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eIMX178\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eOptical Size\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e1\/1.8\"\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003ePixel Size\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e2.4um\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eFrame rate\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e60fps\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eShutter type\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eRolling Shutter\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eADC Bith Depth\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e10bit\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003ePixel Bit Depth\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e8bit, 10bit\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eShutter time\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e20us~1s\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eDigital gain\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e0dB ~ 24dB\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003ePixel Data Formats\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003ebayer RG8 \/ Bayer RG10\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eSynchronization\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eHardware trigger, Software trigger\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eI\/O\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e1 input + 1 GPIO (Input or Output)\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eOperating Temp.\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e0°C~45°C\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eOperating Humidity\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e10%~80%\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e\u0026lt;3W@5V\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eLens Mount\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eC-mount\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e29x29x29mm\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003e65g\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eSoftware\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eWindows \/ Linux \/ Android\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eData Interface\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eUSB3.0\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eProgrammable control\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eImage size, gain, Exposure time, etc.\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\u003ctr\u003e\t\t\t\u003ctd\u003e\u003cstrong\u003eConformity\u003c\/strong\u003e\u003c\/td\u003e\t\t\t\u003ctd\u003eRoHS, CE, USB3 Vision GenICam\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003e\u003cstrong\u003eColor Camera\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, on average has 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276036907142,"sku":"MER2-630-60U3C-DEVKIT","price":272.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-60U3C-DEVKIT_EOL_1_7970f69c-a720-4fed-9809-5bbd519eaeaf.webp?v=1759567785"},{"product_id":"usb3-0-camera-rightangle-6-3mp-color-sony-imx178-mer2-630-60u3c-w90","title":"MER2-630-60U3C-W90, IMX178, 3088x2064, 60fps, 1\/1.8 inch, Rolling shutter, Right angle (90), Color","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera with 90 degree head IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2 USB3.0 camera is an industrial vision camera, with a USB 3.0 interface and a 90 degree camera head. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions due to 90 degree right angle head\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.  \u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276036939910,"sku":"MER2-630-60U3C-W90","price":261.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-60U3C-W90_Camera_USB3_Vision_1_10eac4e5-7e6e-440a-b3fc-41fde712b77c.webp?v=1759567783"},{"product_id":"usb-camera-3-0-6-3mp-monochrome-sony-imx178-mer2-630-60u3m","title":"MER2-630-60U3M, IMX178, 3088x2064, 60fps, 1\/1.8 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2\u003ca title=\"USB3 Camera\" href=\"\/en-gb\/collections\/camera-usb3-vision\"\u003e USB3.0 camera\u003c\/a\u003e is an industrial vision camera, with an USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions (29x29x29mm)\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca title=\"Download page\" href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca title=\"Product life cycle management article\" href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial monochrome \/ black\u0026amp;white camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of (industrial) applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are up to 3 times more light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color light source and lens filter, extra contrast in the image is created. The industrial monochrome camera captures images with high contrast and resolution.  \u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca title=\"Hardware triggering article\" href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003cbr\u003e\u003cbr\u003eIf you don’t use the I\/O port, it is possible to order the camera without I\/O. For high volumes, this will reduce the cost price of the camera with € 10. The minimum order quantity for an industrial USB3 camera without I\/O is 10 pieces. If you want to order the industrial USB3 camera without I\/O, please contact us.\u003c\/p\u003e","brand":"Daheng Imaging","offers":[{"title":"C-mount","offer_id":41442608414854,"sku":"MER2-630-60U3M","price":201.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442608447622,"sku":"MER2-630-60U3M-M01","price":201.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-60U3M_Camera_USB3_Vision_1_85675585-1b59-40da-adf0-f1ea29d88216.webp?v=1759567775"},{"product_id":"rightangle-usb3-camera6-3mp-monochrome-sony-imx178-mer2-630-60u3m-w90","title":"MER2-630-60U3M-W90, IMX178, 3088x2064, 60fps, 1\/1.8 inch, Rolling shutter, Right angle (90), Mono","description":"\u003ch2\u003eIndustrial USB 3.0 Vision camera with 90 degree head IMX178\u003c\/h2\u003e\n\u003cp\u003eThe Mercury2 USB3.0 camera is an industrial vision camera, with a USB 3.0 interface and a 90 degree camera head. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.\u003cbr\u003eThis industrial vision camera model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Compact dimensions due to 90 degree right angle head\u003cbr\u003e-    Suitable for computers (x86) and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering (I\/O cable is required)\u003cbr\u003e\u003cbr\u003eFor more details about our \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial USB 3.0 vision cameras check our manual\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial monochrome \/ black\u0026amp;white camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of (industrial) applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are up to 3 times more light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color light source and lens filter, extra contrast in the image is created. The industrial monochrome camera captures images with high contrast and resolution.  \u003c\/p\u003e\n\u003ch2\u003eI\/O port for hardwaretrigger, strobecontrol or PLC communication\u003c\/h2\u003e\n\u003cp\u003eThe I\/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input\/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I\/O connector are provided in the manual. You can also check our article: \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/hardware-trigger-cameras-master-and-slaves\"\u003ehardware triggering multiple industrial cameras.\u003c\/a\u003e\u003c\/u\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276037005446,"sku":"MER2-630-60U3M-W90","price":261.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-630-60U3M-W90_Camera_USB3_Vision_1_361d278b-5d23-4121-9bb9-5309275c59ef.webp?v=1759567770"},{"product_id":"usb3-0-pcb-oem-camera-module-12-2mp-color-sony-imx226-ven-1220-32u3c-fpc","title":"VEN-1220-32U3C-FPC, IMX226, 4024x3036, 32fps, 1\/1.7 inch, Rolling shutter, Boardlevel, Color","description":"\u003ch2\u003eUSB3 Vision OEM Camera IMX226\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 FPC camera series is an industrial \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\"\u003eboardlevel camera\u003c\/a\u003e, with an USB3.0 interface. It has a special FPC connector, reducing the size of a standard USB3.0 connector. As a result, the camera is even more compact and easier to integrate in devices. A small PCB that converts the FPC connector to a USB3 Micro B connector, so you can easily test this camera. This board can be disconnected to save space. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    You need a very compact camera (29x29x33.3mm) with an extreme compact connection interface\u003cbr\u003e-    100, 200 or 500mm FPC cable option\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276041396358,"sku":"VEN-1220-32U3C-FPC","price":278.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-1220-32U3C-FPC_Camera_USB3_Vision_FPC_1_becfa2f5-d6e4-43bb-9d05-1cd0c9cc1c65.webp?v=1759567595"},{"product_id":"usb3-0-pcb-oem-camera-module-5mp-color-sony-imx335-ven-505-36u3c","title":"VEN-505-36U3C-M01, CS-Mount, C-mount optional, IMX335, 2592x1944, 36fps, 1\/2.8 inch, Rolling shutter, Boardlevel, Color","description":"\u003ch2\u003eUSB3 Vision Camera IMX335\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an industrial \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\" title=\"Board-level camera\"\u003eboard-level camera\u003c\/a\u003e, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003cbr\u003eThe VEN camera series with M12 mount does not have an IR Cut filter. If this is an issue for your application, we recommend using the VEN-cameras with CS-mount (including IR Cut Filter) with our CS-mount to M12 mount adapter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eOur board level cameras allow you to select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3c-m06-no-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color\"\u003eVEN-505-36U3C-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3c-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color\"\u003eVEN-505-36U3C-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-5mp-color-sony-imx335-ven-505-36u3c\"\u003eVEN-505-36U3C-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-5mp-color-sony-imx335-ven-505-36u3c\"\u003eVEN-505-36U3C-M01\u003c\/a\u003e + 5mm extension ring: C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C naar M12 mount\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276041986182,"sku":"VEN-505-36U3C-M01","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-505-36U3C-M01_Camera_USB3_Vision_1_5a2bba2e-e325-49b2-b813-35ddf167a75f.webp?v=1759567548"},{"product_id":"usb3-boardlevel-camera-5mp-monochrome-sony-imx335-ven-505-36u3m-m01-c-mount-cs-mount","title":"VEN-505-36U3M-M01, CS-Mount, C-mount optional, IMX335, 2592x1944, 36fps, 1\/2.8 inch, Rolling shutter, Boardlevel, Mono","description":"\u003ch2\u003eUSB3 Vision Camera IMX335\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an industrial board level camera, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial board level camera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3m-m01-c-mount-cs-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono\"\u003eVEN-505-36U3M-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3m-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono\"\u003eVEN-505-36U3M-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-5mp-monochrome-sony-imx335-ven-505-36u3m-m01-c-mount-cs-mount\"\u003eVEN-505-36U3M-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-5mp-monochrome-sony-imx335-ven-505-36u3m-m01-c-mount-cs-mount\"\u003eVEN-505-36U3M-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C mount to M12\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color as your light source and lens filter, a black and white camera can utilize the product its characteristics. Hereby men can create images with a large contrast and a high resolution. \u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276042018950,"sku":"VEN-505-36U3M-M01","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-505-36U3M-M01_Camera_USB3_Vision_1.0.webp?v=1760359979"},{"product_id":"usb3-0-pcb-oem-camera-module-8-3mp-color-sony-imx334-ven-830-22u3c-m01-c-mount-cs-mount","title":"VEN-830-22U3C-M01, CS-Mount, C-mount optional, IMX334, 3840x2160, 22fps, 1\/1.8 inch, Rolling shutter, Boardlevel, Color","description":"\u003ch2\u003eUSB3 Vision Camera IMX334\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\"\u003eindustrial boardlevel camera\u003c\/a\u003e with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003cbr\u003eThe VEN camera series with M12 mount does not have an IR Cut filter. If this is an issue for your application, we recommend using the VEN-cameras with CS-mount (including IR Cut Filter) with our CS-mount to M12 mount adapter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003e manual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3c-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color\"\u003eVEN-830-22U3C-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3c-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color\"\u003eVEN-830-22U3C-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-8-3mp-color-sony-imx334-ven-830-22u3c-m01-c-mount-cs-mount\"\u003eVEN-830-22U3C-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-8-3mp-color-sony-imx334-ven-830-22u3c-m01-c-mount-cs-mount\"\u003eVEN-830-22U3C-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C to M12 mount\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276042084486,"sku":"VEN-830-22U3C-M01","price":179.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-830-22U3C-M01_Camera_USB3_Vision_1_ea3fc75d-5147-4091-b1b6-6529be9114f5.webp?v=1759567538"},{"product_id":"usb3-boardlevel-camera-8-3mp-monochrome-sony-imx334-ven-830-22u3m-m01-c-mount-cs-mount","title":"VEN-830-22U3M-M01, CS-Mount, C-mount optional, IMX334, 3840x2160, 22fps, 1\/1.8 inch, Rolling shutter, Boardlevel, Mono","description":"\u003ch2\u003eUSB3 Vision Camera IMX334\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\"\u003eindustrial boardlevel camera\u003c\/a\u003e, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003e manual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3m-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono\"\u003eVEN-830-22U3M-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3m-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono\"\u003eVEN-830-22U3M-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-8-3mp-monochrome-sony-imx334-ven-830-22u3m-m01-c-mount-cs-mount\"\u003eVEN-830-22U3M-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-8-3mp-monochrome-sony-imx334-ven-830-22u3m-m01-c-mount-cs-mount\"\u003eVEN-830-22U3M-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C to M12 mount\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color as your light source and lens filter, a black and white camera can utilize the product its characteristics. Hereby men can create images with a large contrast and a high resolution.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41276042150022,"sku":"VEN-830-22U3M-M01","price":179.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-830-22U3M-M01_Camera_USB3_Vision_1_d43671e8-3214-43c1-aaa7-f7b6a0e00fa1.webp?v=1759567533"},{"product_id":"5mp-gige-machine-vision-camera-poe-color-onsemi-ar0521-mer2-507-23gc-p","title":"MER2-507-23GC-P, AR0521, 2592x1944, 23fps, 1\/2.5 inch, Rolling shutter, CMOS, Color","description":"\u003ch2\u003eGigE Vision Camera \u003cspan\u003eOnSemi AR0521\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 GigE camera series is an \u003ca href=\"\/en-gb\/collections\/cameras-industrial\" title=\"Industrial camera\"\u003eindustrial camera\u003c\/a\u003e, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x40.3mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eGigE vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eColor industrial camera\u003c\/h2\u003e\n\u003cp\u003eAn industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.\u003cbr\u003eDue to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: -    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eIndustrial color cameras are used in applications where color information is important.\u003c\/p\u003e\n\u003ch2\u003eIndustrial GigE camera with PoE\u003c\/h2\u003e\n\u003cp\u003ePower over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I\/O. When I\/O is required in an application we advise to supply the camera via a I\/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I\/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442962079878,"sku":"MER2-507-23GC-P","price":230.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442962112646,"sku":"MER2-507-23GC-P-M01","price":230.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-507-23GC-P_Camera_GigE_Vision_1_fc661fd2-47e7-4ea3-97ba-572864dc60f2.webp?v=1759567372"},{"product_id":"gige-vision-camera-5mp-monochrome-on-semi-ar0521-mer2-507-23gm","title":"MER2-507-23GM, AR0521, 2592x1944, 23fps, 1\/2.5 inch, Rolling shutter, CMOS, Mono","description":"\u003ch2\u003eGigE Vision Camera\u003c\/h2\u003e\n\u003cp\u003eThe Mercury 2 \u003ca href=\"\/en-gb\/collections\/camera-gige-vision\" title=\"GigE Camera\"\u003eGigE camera\u003c\/a\u003e series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. For now, the camera is only available without Power over Ethernet (PoE). The Mercury 2 series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. This model is interesting for you when your application complies with the following conditions: -    An industrial camera\u003cbr\u003e-    Maximum cable length of 100 meters\u003cbr\u003e-    Inexpensive and easy installation of cables\u003cbr\u003e-    Dimensions are: 29x29x29mm\u003cbr\u003e-    Optional hardware triggering\u003cbr\u003e\u003cbr\u003eIf more details are required, the \u003cu\u003e\u003cstrong\u003e\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003eindustrial GigE Vision camera manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/u\u003e can be consulted\u003c\/p\u003e\n\u003ch2\u003eMTBF, warranty \u0026amp; product life cycle\u003c\/h2\u003e\n\u003cp\u003eEach year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24\/7). The industrial cameras are certified by TÜV Rheinland and have a 5-year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome industrial camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for image processing. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eIndustrial camera without PoE\u003c\/h2\u003e\n\u003cp\u003eThe power of an industrial GigE camera without PoE is supplied via the I\/O connector. The standard GigE camera is less expensive and generates less heat. The camera is more compact than the version with a PoE because less hardware is needed. Connecting an industrial GigE camera without PoE always requires an I\/O cable.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"C-mount","offer_id":41442962702470,"sku":"MER2-507-23GM","price":220.0,"currency_code":"EUR","in_stock":true},{"title":"CS-mount (+2 weeks extra delivery time)","offer_id":41442962735238,"sku":"MER2-507-23GM-M01","price":220.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/MER2-507-23GM_Camera_GigE_Vision_1_3746196a-0fe7-44c1-8bec-b3ab5630e052.webp?v=1759567364"},{"product_id":"ven-505-36u3c-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color","title":"VEN-505-36U3C-M05, M12-mount, IMX335, 2592x1944, 36fps, 1\/2.8 inch, Rolling shutter, Boardlevel, Color","description":"\u003ch2\u003eUSB3 Vision Camera IMX335\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an industrial \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\" title=\"Board-level camera\"\u003eboard-level camera\u003c\/a\u003e, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003cbr\u003eThe VEN camera series with M12 mount does not have an IR Cut filter. If this is an issue for your application, we recommend using the VEN-cameras with CS-mount (including IR Cut Filter) with our CS-mount to M12 mount adapter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eOur board level cameras allow you to select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3c-m06-no-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color\"\u003eVEN-505-36U3C-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3c-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color\"\u003eVEN-505-36U3C-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-5mp-color-sony-imx335-ven-505-36u3c\"\u003eVEN-505-36U3C-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-5mp-color-sony-imx335-ven-505-36u3c\"\u003eVEN-505-36U3C-M01\u003c\/a\u003e + 5mm extension ring: C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C to M12 mount\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401701138566,"sku":"VEN-505-36U3C-M05","price":152.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-505-36U3C-M05_Camera_USB3_Vision_1_e5cc8f55-e1b2-4cdc-bf0d-fc98b733a04a.webp?v=1759566177"},{"product_id":"ven-505-36u3c-m06-no-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color","title":"VEN-505-36U3C-M06, No-mount, IMX335, 2592x1944, 36fps, 1\/2.8 inch, Rolling shutter, Boardlevel, Color","description":"\u003ch2\u003eUSB3 Vision Camera IMX335\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an industrial \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\" title=\"Board-level camera\"\u003eboard-level camera\u003c\/a\u003e, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003cbr\u003eThe VEN camera series with M12 mount does not have an IR Cut filter. If this is an issue for your application, we recommend using the VEN-cameras with CS-mount (including IR Cut Filter) with our CS-mount to M12 mount adapter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eOur board level cameras allow you to select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3c-m06-no-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color\"\u003eVEN-505-36U3C-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3c-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-color\"\u003eVEN-505-36U3C-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-5mp-color-sony-imx335-ven-505-36u3c\"\u003eVEN-505-36U3C-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-5mp-color-sony-imx335-ven-505-36u3c\"\u003eVEN-505-36U3C-M01\u003c\/a\u003e + 5mm extension ring: C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C mount to M12\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401702121606,"sku":"VEN-505-36U3C-M06","price":150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-505-36U3C-M06_Camera_USB3_Vision_2-1.webp?v=1780403177"},{"product_id":"ven-505-36u3m-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono","title":"VEN-505-36U3M-M05, M12-Mount, IMX335, 2592x1944, 36fps, 1\/2.8 inch, Rolling shutter, Boardlevel, Mono","description":"\u003ch2\u003eUSB3 Vision Camera IMX335\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an industrial boardlevel camera, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3m-m01-c-mount-cs-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono\"\u003eVEN-505-36U3M-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3m-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono\"\u003eVEN-505-36U3M-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-5mp-monochrome-sony-imx335-ven-505-36u3m-m01-c-mount-cs-mount\"\u003eVEN-505-36U3M-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-5mp-monochrome-sony-imx335-ven-505-36u3m-m01-c-mount-cs-mount\"\u003eVEN-505-36U3M-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter c mount to M12\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the right color as your light source and lens filter, a black and white camera can utilize the product its characteristics. Hereby men can create images with a large contrast and a high resolution. \u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401707692166,"sku":"VEN-505-36U3M-M05","price":152.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-505-36U3M-M05_Camera_USB3_Vision_1_0c796d24-fb43-40de-b544-35b20ccbcf4f.webp?v=1759566164"},{"product_id":"ven-505-36u3m-m01-c-mount-cs-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono","title":"VEN-505-36U3M-M06, No-Mount, IMX335, 2592x1944, 36fps, 1\/2.8 inch, Rolling shutter, Boardlevel, Mono","description":"\u003ch2\u003eUSB3 Vision Camera IMX335\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an industrial boardlevel camera, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the \u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003emanual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3m-m01-c-mount-cs-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono\"\u003eVEN-505-36U3M-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-505-36u3m-m05-m12-mount-imx335-2592x1944-36fps-1-2-8-rolling-shutter-boardlevel-mono\"\u003eVEN-505-36U3M-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-5mp-monochrome-sony-imx335-ven-505-36u3m-m01-c-mount-cs-mount\"\u003eVEN-505-36U3M-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-5mp-monochrome-sony-imx335-ven-505-36u3m-m01-c-mount-cs-mount\"\u003eVEN-505-36U3M-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/VA-LADAP-LCM-LM12-M12-lens-on-C-mount-Camera\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401708085382,"sku":"VEN-505-36U3M-M06","price":150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-505-36U3M-M06_Camera_USB3_Vision_1_a5170881-f6e0-4e77-9310-4ef6037b38dc.webp?v=1759566158"},{"product_id":"ven-830-22u3c-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color","title":"VEN-830-22U3C-M05, M12-Mount, IMX334, 3840x2160, 22fps, 1\/1.8 inch, Rolling shutter, Boardlevel, Color","description":"\u003ch2\u003eUSB3 Vision Camera IMX334\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\"\u003eindustrial boardlevel camera,\u003c\/a\u003e with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003cbr\u003eThe VEN camera series with M12 mount does not have an IR Cut filter. If this is an issue for your application, we recommend using the VEN-cameras with CS-mount (including IR Cut Filter) with our CS-mount to M12 mount adapter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003e manual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3c-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color\"\u003eVEN-830-22U3C-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3c-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color\"\u003eVEN-830-22U3C-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-8-3mp-color-sony-imx334-ven-830-22u3c-m01-c-mount-cs-mount\"\u003eVEN-830-22U3C-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-8-3mp-color-sony-imx334-ven-830-22u3c-m01-c-mount-cs-mount\"\u003eVEN-830-22U3C-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/VA-LADAP-LCM-LM12-M12-lens-on-C-mount-Camera\"\u003eC-to-M12\u003c\/a\u003e\u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C to M12 mount\"\u003e \u003c\/a\u003e\u003ca href=\"\/en-gb\/products\/VA-LADAP-LCM-LM12-M12-lens-on-C-mount-Camera\"\u003eadapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401712738438,"sku":"VEN-830-22U3C-M05","price":182.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-830-22U3C-M05_Camera_USB3_Vision_1_eebed702-77e1-449b-bfbf-c9c67320e6a3.webp?v=1759566154"},{"product_id":"ven-830-22u3c-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color","title":"VEN-830-22U3C-M06, No-Mount, IMX334, 3840x2160, 22fps, 1\/1.8 inch, Rolling shutter, Boardlevel, Color","description":"\u003ch2\u003eUSB3 Vision Camera IMX334\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\"\u003eindustrial boardlevel camera\u003c\/a\u003e with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003cbr\u003eThe VEN camera series with M12 mount does not have an IR Cut filter. If this is an issue for your application, we recommend using the VEN-cameras with CS-mount (including IR Cut Filter) with our CS-mount to M12 mount adapter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003e manual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3c-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color\"\u003eVEN-830-22U3C-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3c-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-color\"\u003eVEN-830-22U3C-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-8-3mp-color-sony-imx334-ven-830-22u3c-m01-c-mount-cs-mount\"\u003eVEN-830-22U3C-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-0-pcb-oem-camera-module-8-3mp-color-sony-imx334-ven-830-22u3c-m01-c-mount-cs-mount\"\u003eVEN-830-22U3C-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C to M12 mount\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial Color Camera\u003c\/h2\u003e\n\u003cp\u003eA color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:\u003cbr\u003e-    Increase the amount of light\u003cbr\u003e-    Increase the gain\u003cbr\u003e-    Increase shutter speed \/ exposure time\u003cbr\u003e-    Select a more light sensitive sensor\u003cbr\u003e-    Select a more light sensitive lens\u003cbr\u003eCompared to security cameras and webcams, an industrial color camera has larger and more light sensitive pixels. Providing you an excellent image quality.\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401714049158,"sku":"VEN-830-22U3C-M06","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-830-22U3C-M06_Camera_USB3_Vision_1_fe815634-d9a0-4f17-ac08-c33170774e25.webp?v=1759566149"},{"product_id":"ven-830-22u3m-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono","title":"VEN-830-22U3M-M05, M12-Mount, IMX334, 3840x2160, 22fps, 1\/1.8 inch, Rolling shutter, Boardlevel, Mono","description":"\u003ch2\u003eUSB3 Vision Camera IMX334\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\"\u003eindustrial boardlevel camera\u003c\/a\u003e with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003e manual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3m-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono\"\u003eVEN-830-22U3M-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3m-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono\"\u003eVEN-830-22U3M-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-8-3mp-monochrome-sony-imx334-ven-830-22u3m-m01-c-mount-cs-mount\"\u003eVEN-830-22U3M-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-8-3mp-monochrome-sony-imx334-ven-830-22u3m-m01-c-mount-cs-mount\"\u003eVEN-830-22U3M-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\" title=\"Lens adapter C to M12 mount\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. \u003cspan lang=\"EN-GB\" style=\"mso-ansi-language: EN-GB;\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401721979014,"sku":"VEN-830-22U3M-M05","price":182.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-830-22U3M-M05_Camera_USB3_Vision_1_aa7ba520-34b3-4c04-90a7-16fb6c7a9f80.webp?v=1759566145"},{"product_id":"ven-830-22u3m-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono","title":"VEN-830-22U3M-M06, No-Mount, IMX334, 3840x2160, 22fps, 1\/1.8 inch, Rolling shutter, Boardlevel, Mono","description":"\u003ch2\u003eUSB3 Vision Camera IMX334\u003c\/h2\u003e\n\u003cp\u003eThe Venus USB3.0 camera series is an \u003ca href=\"\/en-gb\/collections\/camera-boardlevel-industrial\"\u003eindustrial boardlevel camera\u003c\/a\u003e, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family.\u003cbr\u003e\u003cbr\u003eThis model is interesting for you when your application complies with the following conditions:\u003cbr\u003e-    An industrial boardlevelcamera\u003cbr\u003e-    Maximum cable length of 4.5 meters\u003cbr\u003e-    Only one cable is required to connect the device\u003cbr\u003e-    Suitable for PC’s and embedded platforms: ARM V7 \u0026amp; ARM V8\u003cbr\u003e-    Hardware triggering\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 50 cm open-end I\/O cable is included. \u003cbr\u003eIf more details are required, the\u003ca href=\"\/en-gb\/pages\/requestdownload\"\u003e manual can be consulted.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFlexible housing options\u003c\/h2\u003e\n\u003cp\u003eYou can select the housing that fits your requirements. The Venus USB3.0 cameras is available in the following form factors:\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3m-m06-no-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono\"\u003eVEN-830-22U3M-M06\u003c\/a\u003e - No housing: 32.5x32.5x8.1mm | 7 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/ven-830-22u3m-m05-m12-mount-imx334-3840x2160-22fps-1-1-8-rolling-shutter-boardlevel-mono\"\u003eVEN-830-22U3M-M05\u003c\/a\u003e - M12: 35x35x15.1mm | 32 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-8-3mp-monochrome-sony-imx334-ven-830-22u3m-m01-c-mount-cs-mount\"\u003eVEN-830-22U3M-M01\u003c\/a\u003e - CS-mount: 35x35x15.8mm | 31 grams\u003cbr\u003e\u003ca href=\"\/en-gb\/products\/usb3-boardlevel-camera-8-3mp-monochrome-sony-imx334-ven-830-22u3m-m01-c-mount-cs-mount\"\u003eVEN-830-22U3M-M01\u003c\/a\u003e + 5mm extension ring - C-Mount: 35x35x20.8mm | 34 grams\u003cbr\u003e\u003cbr\u003eWhen using a M12 lens, you can select the M12 mount or you can select the CS-mount option together with our \u003ca title=\"Lens adapter C to M12 mount\" href=\"\/en-gb\/products\/va-ladap-lcm-lm12-m12-lens-on-c-mount-camera\"\u003eC-to-M12 adapter\u003c\/a\u003e.\u003cbr\u003e \u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Product Life Cycle\u003c\/h2\u003e\n\u003cp\u003eDaheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our \u003cu\u003e\u003ca href=\"\/en-gb\/blogs\/machine-vision-knowledge-center\/product-life-cycle-management-industrial-camera\"\u003eproduct life cycle management, check this article\u003c\/a\u003e\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eMonochrome Camera\u003c\/h2\u003e\n\u003cp\u003eA black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. \u003cspan style=\"mso-ansi-language: EN-GB;\" lang=\"EN-GB\"\u003eBy selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.\u003c\/span\u003e\u003c\/p\u003e","brand":"VA Imaging","offers":[{"title":"Default Title","offer_id":41401722372230,"sku":"VEN-830-22U3M-M06","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/files\/VEN-830-22U3M-M06_Camera_USB3_Vision_1_47f1d4b8-1d64-48d0-9727-ad4866f6ba35.webp?v=1759566139"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5242\/0486\/collections\/MER2-041-302GM-P_Camera_GigE_Vision_1_7f1c3512-6f0c-4d70-b1fd-63045619f319.webp?v=1765279392","url":"https:\/\/va-imaging.com\/en-gb\/collections\/camera-rolling-shutter.oembed?page=6","provider":"VA Imaging","version":"1.0","type":"link"}