MARS-2621-42GTC, GMAX0505, 5120x5120, 42fps, 1.1 inch, Global shutter, CMOS, Color

MARS-2621-42GTC Camera 10GigE Vision
MARS-2621-42GTC
  • GMAX0505
  • 5120x5120
  • 42fps
  • 1.1 inch
  • Global shutter
  • CMOS
  • Color
€1.956,00
Tempi di consegna: Standard 3-6, Express 0-3 settimane
Garanzia di 3 anni
Certificato da TÜV Rheinland
Descrizione

10GIGE VISION CAMERA GMAX0505

The Mars 10GigE series is an industrial 10GigE vision camera, with a 10GigE interface. This is the best interface for high resolution and / or, high speed imaging where cable length is more than 5 meters. 10GigE is 10x faster than a normal GigE ethernet camera and 2x faster than USB3.
This 10 GigE camera model is interesting for you when your application complies with the following conditions:

  • An industrial highspeed or highresolution camera
  • Maximum cable length of 100 meters using cat6a or higher cable
  • Inexpensive and easy installation of cables
  • Only one cable is required to connect the camera
  • Dimensions are: 60x60x54mm

The camera requires a 10GigE framegrabber. If your computer does not have a 10GigE port, we recommend this framegrabber VA-PCIe4-10GP-1.  If more details are required, the manual can be consulted.

Altre informazioni

Specifiche

Numero di parte MARS-2621-42GTC
Interfaccia della telecamera 10GigE Vision
Risoluzione della telecamera 5120x5120
Frequenza fotogrammi della telecamera (fps) 42
Dimensione pixel della telecamera (um) 2.5
Telecamera Colore/Mono Color
Tipo di sensore della telecamera GMAX0505
Dimensioni del sensore della telecamera 1.1"
Tipo di otturatore della telecamera Global Shutter
Tempo di otturazione della telecamera 14us~1s
Profondità di bit dell'ADC della telecamera TBD
Vedi tutte le specifiche

Downloads

Hai bisogno del manuale di MARS-2621-42GTC?

Hai una domanda su MARS-2621-42GTC?

Facci la tua domanda tramite


INDUSTRIAL 10GIGE CAMERA WITHOUT POE

The 10GigE camera series does NOT have Power over Ethernet (PoE). Make sure to order a I/O cable suitable for MARS cameras to power the camera.


COLOR INDUSTRIAL CAMERA

An industrial color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.
Due to the RGB filter on the pixels, every single pixel, considering white light, captures on average 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available: 

  • Increase the amount of light
  • Increase the gain
  • Increase shutter speed / exposure time
  • Select a more light sensitive sensor
  • Select a more light sensitive lens

Industrial color cameras are used in applications where color information is important.


MTBF, WARRANTY & PRODUCT LIFE CYCLE

Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.

Numero di parte MARS-2621-42GTC
Interfaccia della telecamera 10GigE Vision
Risoluzione della telecamera 5120x5120
Frequenza fotogrammi della telecamera (fps) 42
Dimensione pixel della telecamera (um) 2.5
Telecamera Colore/Mono Color
Tipo di sensore della telecamera GMAX0505
Dimensioni del sensore della telecamera 1.1"
Tipo di otturatore della telecamera Global Shutter
Tempo di otturazione della telecamera 14us~1s
Profondità di bit dell'ADC della telecamera TBD
Profondità pixel della telecamera TBD
Guadagno digitale della telecamera TBD
Formato dei dati pixel della telecamera TBD
Sincronizzazione della telecamera Hardware trigger, software trigger
I/O della telecamera 1 opto-isolated input line and 1 opto isolated output line, 2 GPIO
Temperatura di funzionamento della telecamera. 0°C~50°C
Umidità di funzionamento della telecamera 10%~80%
Attacco per obiettivo della telecamera C
Dimensioni della telecamera 60x60x54mm
Telecamera SDK Windows / Linux / Android
Consumo energetico della telecamera <10W @24VDC
Peso della telecamera (g) 320
Conformità della telecamera CE, RoHS, 5GigE-Vision, GenICam
Megapixel della telecamera 26
Numero di parte vecchio MARS-2621-42GTC
€1.956,00

Recensioni

Visualizza tutte le recensioni

Risorse di Visione e di Automazione

Va Imaging si colloca all'intersezione tra creatività e applicazioni pratiche, offrendo prodotti di elaborazione delle immagini progettati per l'uso in macchine innovative. Ti forniamo prodotti di visione artificiale che ti consentono di applicare la tua creatività in modi creativi. Con le nostre telecamere, obiettivi e illuminazioni, la tua innovazione prende forma concreta nel mondo di Vision & Automation Imaging.