ME2P-170-210U3C, IMX425, 1608x1104, 210fps, 1.1", Global shutter, CMOS, Color

ME2P-170-210U3C Camera USB3 Vision
ME2P-170-210U3C
  • IMX425
  • 1608x1104
  • 210fps
  • 1.1"
  • Global shutter
  • CMOS
  • Color
€813,00
Tiempo de entrega: Estándar 3-6 semanas, Exprés 0-3 semanas
Garantía de 3 años
Certificado por TÜV Rheinland

Descripción

USB3 Vision Camera

The Mercury 2 Pro USB3 Vision Camera series is an industrial vision camera, with a USB3 Vision interface. This industrial vision camera series feature high resolution, low noise global shutter sensors in a compact housing. USB3 is the high speed interface for industrial vision cameras, making it ideal for high resolution, highspeed image capturing. ME2P series have advanced features. If you are using advanced features, please contact us, so we can double-check if the specific feature is present or can be implemented for you. The ME2P USB3 Vision Color cameras supports color correction for improving the image quality.
The USB3 Vision Camera ME2P series is interesting for you when your application complies with the following conditions:
-    A compact industrial camera
-    Maximum cable length of 4,6 meters
-    Inexpensive and easy installation of cables
-    Only one cable is required to connect the device
-    Hardware triggering / Digital I/O
-    advanced image processing features

If more details are required, the manual of the ME2P USB3 Vision camera can be consulted.

Más información

Especificaciones

Número de parte ME2P-170-210U3C
Camera interface USB3 Vision
Camera Resolution 1608x1104
Camera Frame rate (fps) 210
Camera pixel size (um) 9.0
Camera Color/Mono Color
Camera Sensor type Sony IMX425
Camera sensor size 1.1"
Camera Shutter Type Global Shutter
Camera shutter time 9us~1s
Camera ADC Bit Depth 10bit, 12bit
er todas las especificaciones

Descargas

Necesita el ME2P-170-210U3C manual?

¿Tiene alguna pregunta sobre ME2P-170-210U3C?

Haga su pregunta a través de

MTBF, warranty & product life cycle

Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.

Industrial Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.
Due to the RGB filter on the pixels, every single pixel, considering white light, on average has 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens

Advanced vision camera features

The ME2P USB3 vision camera series has both standard and advanced features onboard, like:
- Programmable ROI, increased frame rate with partial scan
- Gain, exposure and white balance programmable (white balance only for color models)
- Support auto gain, auto exposure and auto white balance (auto white balance only for color models)
- Four acquisition controls: Single frame acquisition/Continuous acquisition/Software trigger acquisition/External trigger acquisition
- Trigger mode: Frame Start /Frame Burst Start
- Support color correction for improving image quality (only for color models)
- Exposure delay effectively reduces the effect of the strobe delay
- Compatible with GenICam™ and GigE Vision®, can be used in a wide range of 3rd-party software such as HALCON and LabVIEW directly
- Optimized software package for lower CPU loads in host running 32/64bit Windows
- Multiple samples and easy-to-integrate SDK for various programming tools
- Regulations: CE, RoHS, GenICam, USB3 Vision

The complete set of features makes the ME2P USB3 Vision camera series a perfect choice for high performance image processing.

Número de parte ME2P-170-210U3C
Camera interface USB3 Vision
Camera Resolution 1608x1104
Camera Frame rate (fps) 210
Camera pixel size (um) 9.0
Camera Color/Mono Color
Camera Sensor type Sony IMX425
Camera sensor size 1.1"
Camera Shutter Type Global Shutter
Camera shutter time 9us~1s
Camera ADC Bit Depth 10bit, 12bit
Camera pixel bith depth 8bit, 10bit, 12bit
Camera Digital Gain 0dB~24dB
Camera pixel data format Bayer RG8 / Bayer RG10 / Bayer RG12
Camera synchronization Hardware trigger, software trigger
Camera I/O 1 input and 1 output with opto-isolated, 2 programmable GPIOs
Camera operating temp. 0°C~45°C
Camera operating humidity 10%~80%
Camera lens mount C
Camera dimensions 36x31x38.8mm
Camera SDK Software 3rd-party software such as HALCON, MERLIC and LabVIEW
Camera power consumption < 3.4 W @ 5 VDC
Camera weight (g) 66
Camera Conformity CE, RoHS, FCC, ICES, UKCA, USB3.0 Vision®, GenICam®
Camera Megapixel 2
Partnumber old ME2P-1230-23U3C
€813,00

Reseñas de cámaras industriales

Las reseñas se traducen automáticamente a tu idioma. Haz clic aquí para ver la reseña original y verificar su autenticidad.

Vision & Automation Resources

Vision & Automation Resources