MER2-507-23GM-P-NIR, AR0522, 2592x1944, 23fps, 1/2.5 inch, Rolling shutter, CMOS, Mono NIR
- AR0522
- 2592x1944
- 23fps
- 1/2.5 inch
- Rolling shutter
- CMOS
- Mono NIR
GigE Vision Camera OnSemi AR0522
The Mercury GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The camera is available with and without Power over Ethernet (PoE).
This model is interesting for you when your application complies with the following conditions:
- An industrial camera
- Maximum cable length of 100 meters
- Inexpensive and easy installation of cables
- Only one cable is required to connect the device (in case of PoE)
- Dimensions are: 29x29x29mm (without PoE), 29x29x38 mm (with PoE)
- Optional hardware triggering
If more details are required, the manual can be consulted.
Especificaciones
| Número de parte | MER2-507-23GM-P-NIR |
| Interface | GigE Vision |
| Resolution | 2592x1944 |
| Frame rate (fps) | 23 |
| Pixel size (um) | 2.2 |
| Color/Mono | Monochrome NIR |
| Sensor type | Onsemi AR0522 |
| Sensor size | 1/2.5" |
| Shutter Type | Rolling Shutter |
| Shutter time | 52us~1s |
| ADC Bit Depth | 12bit |
¿Tiene alguna pregunta sobre MER2-507-23GM-P-NIR?
Haga su pregunta a través de
MTBF, warranty & product life cycle
Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.
Monochrome Camera
A black and white camera, also known as a monochrome camera, offers advantages in a variety of applications. While the market for security and telephony focuses on color cameras, the industrial market utilizes the advantages of black and white cameras. Black and white cameras are very light sensitive, provide sharp images and reduces data compared to color. This makes it ideal for the processing of images. By selecting the optimal lighting color and lens filter, product characteristics can be highlighted. Enabling the creation of high-resolution images with high contrast using a monochrome cameras.
NIR
NIR cameras are monochrome sensors that are specially developed for the Near Infrared Region. These are the wavelengths from 800-1000nM. Normal IR LEDs operate at 850nM or 930nM. The photon sensitive parts of the pixel of a NIR camera are deeper than of the standard monochrome camera, therefore they are better able to catch the photons of the higher wave lengths (800-1000nM). NIR sensors are more expensive than standard monochrome camera’s. These cameras are ideal for low light applications, like intelligent transport systems (ITS) and medical imaging.
PoE
Power over Ethernet (PoE) for GigE is invented to supply both power and data over a single standard ethernet cable. This can reduce the cabling and installing time in applications where no hardware trigger or I/O is required. When I/O is used in an application, we advise supplying the camera voltage using the I/O connector. Power over Ethernet consumes more power than power by the I/O connector. The GigE camera will get warmer using PoE, because the voltage of the PoE line must be converted to a lower voltage, resulting in heat generation. A PoE GigE camera is also larger then the version without PoE because an additional board is required to extract the power from the ethernet connector and convert the voltage to a lower voltage level. Due to the extra hardware required, the price of a PoE GigE camera is also higher than the version without PoE.
| Número de parte | MER2-507-23GM-P-NIR |
| Interface | GigE Vision |
| Resolution | 2592x1944 |
| Frame rate (fps) | 23 |
| Pixel size (um) | 2.2 |
| Color/Mono | Monochrome NIR |
| Sensor type | Onsemi AR0522 |
| Sensor size | 1/2.5" |
| Shutter Type | Rolling Shutter |
| Shutter time | 52us~1s |
| ADC Bit Depth | 12bit |
| Pixel bit depth | 8bit, 12bit |
| Digital Gain | 0dB ~ 23.6dB |
| Pixel data format | Mono8 / Mono12 |
| Synchronization | Hardware trigger, software trigger |
| I/O | 1 opto-isolated input line and 1 opto isolated output line, 2 GPIO |
| Operating temp. | 0°C~45°C |
| Operating humidity | 10%~80% |
| Mount | C |
| Dimensions | 29x29x40.3mm |
| SDK Software | Windows / Linux / Android |
| Power consumption | <3W@24V <3.75W@PoE |
| Weight (g) | 75 |
| Conformity | RoHS, CE, FCC, GigE Vision, Genicam |
| Megapixel | 5 |
| Partnumber old | MER2-507-23GM-P-NIR |
| SDK Software | Windows / Linux / Android |
