MER2-502-79U3M-POL, IMX250 Polarization, 2448x2048, 79fps, 2/3 inch, Global shutter, CMOS, Mono
- IMX250 Polarization
- 2448x2048
- 79fps
- 2/3 inch
- Global shutter
- CMOS
- Mono
USB3 Polarization Camera IMX250
The USB3.0 Polarization camera is an industrial vision camera, with an USB3.0 interface. In our whitepaper about USB3 polarization camera you can find more information about the benefits of an industrial polarization camera.
This model is interesting for you when your application complies with the following conditions:
- An industrial camera
- Polarization
- Maximum cable length of 4.5 meters
- Only one cable is required to connect the device
- Dimensions are: 29x29x29mm
- Suitable for PC’s and embedded platforms: ARM V7 & ARM V8
- Optional hardware triggering
If more details are required, the manual can be consulted.
Especificaciones
| Número de parte | MER2-502-79U3M-POL |
| Interface | USB3 Vision |
| Resolution | 2448x2048 |
| Frame rate (fps) | 79 |
| Pixel size (um) | 3.45 |
| Color/Mono | Mono |
| Sensor type | Sony IMX250 |
| Sensor size | 2/3" |
| Shutter Type | Global Shutter |
| Shutter time | 52us~1s |
| ADC Bit Depth | 10bit |
¿Tiene alguna pregunta sobre MER2-502-79U3M-POL?
Haga su pregunta a través de
MTBF, warranty & product life cycle
Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.
Monochrome Polarization Camera
The MER2-502-79U3M-POL camera is a polarization camera with the Sony IMX250 CMOS sensor, and capture image of four different light directions simultaneously. Polarization camera can inspect reflective surface such as glass, metal which are difficult for monochrome or color camera. In our whitepaper about USB3 polarization camera you can find example images taken with this camera.
With I/O
The I/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example: LED. Furthermore, the camera has two GPIO’s (General Purpose Input/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I/O connector are provided in the manual.
Information sensor manufacturer
Our polarization camera with the Sony IMX250 image sensor uses a 3,45µm pixelsize and has a total resolution of 5.02 MegaPixel. The polarization camera has a polarizer filter which is a four-directional polarizer placed on the photodiode of the image sensor. This means that this polarized camera is able to capture a four directional image in one shot. And calculates the angle and direction of polarization based on the intensity of every direction of polarization. The filter incorporates a 2x2 pattern, where every pixel has a filter with a different angle. Whilst using polarized light the only portion of light perpendicular to the angle of the filter will pass.
Polarization filter angles
Summarized, the polarization filter characteristics are:
- When the filter blocks light at a 90º angle, it passes 0º through the filter.
- When it blocks light at a 45º angle it passes 135º through the filter.
- When it blocks light at an 135º angle it passes through 45º the filter.
- Finally, when it blocks lights at an 0º angle it passes light through a 90º angle.
The model of our polarization camera is MER2-502-79U3M-POL. It has a USB3 interface, a 2448(H)x2048(V) resolution, 79 fps, 2/3”, Global Shutter, and a 3,45µm x 3,45µm cell size.
| Número de parte | MER2-502-79U3M-POL |
| Interface | USB3 Vision |
| Resolution | 2448x2048 |
| Frame rate (fps) | 79 |
| Pixel size (um) | 3.45 |
| Color/Mono | Mono |
| Sensor type | Sony IMX250 |
| Sensor size | 2/3" |
| Shutter Type | Global Shutter |
| Shutter time | 52us~1s |
| ADC Bit Depth | 10bit |
| Pixel bit depth | 8bit, 10bit |
| Digital Gain | 0dB~24dB |
| Pixel data format | Mono8 / Mono10 |
| Synchronization | Hardware trigger, software trigger |
| I/O | 1 opto-isolated input line and 1 opto isolated output line, 2 GPIO |
| Operating temp. | 0°C~45°C |
| Operating humidity | 10%~80% |
| Mount | C |
| Dimensions | 29x29x29mm |
| SDK Software | Windows / Linux / Android |
| Power consumption | <3W@5V |
| Weight (g) | 65 |
| Conformity | RoHS, CE, FCC, USB3 Vision, Genicam |
| Megapixel | 5 |
| Partnumber old | MER2-502-79U3M-POL |
| SDK Software | Windows / Linux / Android |
