ME2S-1260-9GC-P, XGS12000, 4096x3072, 9fps, 1 inch, Global shutter, CMOS, Color
- XGS12000
- 4096x3072
- 9fps
- 1 inch
- Global shutter
- CMOS
- Color
GigE Vision Camera XGS12000
The ME2S GigE Vision Camera series is an industrial vision camera, with a GigE Vision interface. GigE is the most common interface for camera’s in traditional machine vision applications. The GigE Vision Camera series is interesting for you when your application complies with the following conditions:
- A compact high resolution global shutter camera
- Maximum cable length of 100 meters
- Inexpensive and easy installation of cables
- Only one cable is required to connect the industrial camera
- advanced image processing features
If more details are required, the manual of the ME2S GigE Vision camera can be consulted.
Specifiche
| Numero di parte | ME2S-1260-9GC-P |
| Interfaccia | GigE Vision |
| Risoluzione | 4096x3072 |
| Frequenza fotogrammi (fps) | 9 |
| Dimensione pixel (um) | 3.2 |
| Colore/Mono | Color |
| Tipo di sensore | OnSemi XGS12000 |
| Dimensioni del sensore | 1" |
| Tipo di otturatore | Global Shutter |
| Tempo di otturazione | 52us~1s |
| Profondità di bit dell'ADC | 12bit |
MTBF, warranty & product life cycle
Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.
Industrial Color Camera
A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.
Due to the RGB filter on the pixels, every single pixel, considering white light, on average has 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
- Increase the amount of light
- Increase the gain
- Increase shutter speed / exposure time
- Select a more light sensitive sensor
- Select a more light sensitive lens
Industrial camera with PoE
Power over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I/O. When I/O is required in an application, we advise supplying the camera via a I/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.
| Numero di parte | ME2S-1260-9GC-P |
| Interfaccia | GigE Vision |
| Risoluzione | 4096x3072 |
| Frequenza fotogrammi (fps) | 9 |
| Dimensione pixel (um) | 3.2 |
| Colore/Mono | Color |
| Tipo di sensore | OnSemi XGS12000 |
| Dimensioni del sensore | 1" |
| Tipo di otturatore | Global Shutter |
| Tempo di otturazione | 52us~1s |
| Profondità di bit dell'ADC | 12bit |
| Profondità di bit del pixel | 8bit, 12bit |
| Guadagno digitale | 0dB~24dB |
| Formato dei dati pixel | Bayer RG8 / Bayer RG12 |
| Sincronizzazione | Hardware trigger, software trigger |
| I/O | 1 input and 1 output with opto-isolated, 1 programmable GPIO |
| Temperatura di funzionamento | 0°C~45°C |
| Umidità di funzionamento | 10%~80% |
| Attacco per obiettivo | C |
| Dimensioni | 29x29x50.6mm |
| SDK | 3rd-party software such as HALCON, VisionPro and LabVIEW |
| Consumo energetico | < 4.1 W @ 24 VDC; < 4.5 W @ PoE |
| Conformità | CE, RoHS, GigE Vision®, GenICam® |
| Megapixel | 12 |
| Numero di parte vecchio | ME2S-1260-9GC-P |
| SDK | 3rd-party software such as HALCON, VisionPro and LabVIEW |
