Smart camera vs. PC-connected industrial camera

Formerly known as

Support About us Certificates FAQ Knowledge center Application Wiki

Downloads Contact

Industrial Cameras

USB3 camera

GigE & 2.5GigE camera

5GigE & 10GigE camera

Line scan camera

Boardlevel camera

Right angled camera

SWIR camera

UV camera

CoaXPress camera

Streaming video camera

EOL / End of Life

USB3 camera

VA Imaging offers industrial USB3 cameras up to 45MP and 1000fps+. These are used in industrial, pharmaceutical and machine vision applications. Our cameras comply with the industrial “USB3 Vision” standard. All USB3 cameras are equipped with a CMOS or CCD image sensor. Both cameras with and without housing are available. The USB3 board-level camera series is suitable for high volume OEM projects.

GigE & 2.5GigE camera

VA Imaging sells GigE cameras up to 65MP for industrial, OEM and machine vision applications. Our leanest prices are directly visible for each GigE camera and you can buy them directly online. The industrial GigE cameras are available with a wide variety of sensors of well-known brands such as Sony, Gpixel and OnSemi. The image sensor is integrated in a compact aluminium GigE camera housing, but on request the cameras can be delivered without housing as well.

5GigE & 10GigE camera

Explore our range of industrial 5GigE and 10GigE cameras available for purchase online. Equipped with sensors of well-known brands such Sony, Onsemi and Gpixel, they are suitable for high resolution and high frame rate applications. 10GigE cameras can achieve 10 times more bandwidth than a regular GigE camera, achieving 10 times faster frame rate at the same resolution as a GigE camera. They are suitable for applications where a high bandwidth is required with a long distance cables.
To achieve the full bandwidth, simple pair our 10GigE cameras with our compatible 10GigE frame grabbers and 10GigE cables.
Read all about 5GigE and 10GigE Vision camera interfaces in our machine vision Knowledge Center.

Line scan camera

VA imaging has a strong portfolio of line scan cameras. They are designed for diverse machine vision applications. Below you can find an overview of all our models.

If you don’t find the solution that you are looking for, you can check our custom line scan camera solutions.

More general information, such as features and benefits of an industrial line scan camera, can also be found at the bottom of this page.

Boardlevel camera

Our industrial USB3 single board cameras for embedded vision are available online. Boardlevel / PCB cameras are suitable for product developments that require a single board camera module with small formfactor and low price.
These board level cameras have a USB3 interface for power, communication and image transfer. A separate connector provides an input and output to sync multiple boardlevel cameras, hardware trigger the cameras or control external lighting.
Board level cameras are often integrated in products of our customers, like Ophthalmology devices, ANPR cameras, handheld devices, metrology devices and digital microscopes.

Right angled camera

Our industrial right angled cameras are developed for machine vision and computer vision projects with limited installation space. The lens mount is 90-degree rotated, therefore a good solution in applications where there is little space in height. The total length of the lens and camera is shorter since the C-mount lens thread is located inside the right angled camera housing. A total reduction in height of 50mm is possible, because the cables are mounted on the side of the 90-degree industrial right angled camera.

SWIR camera

SWIR cameras were introduced to the field of machine vision to augment the existing imaging technology and enhance precision and accuracy. They have the capability to reveal and detect objects that are otherwise inaccessible to the visible spectrum. Our SWIR cameras are Visible-SWIR, meaning that they can detect not only the SWIR range but also the visible field, eliminating the need of two separated cameras.

The SWIR cameras can be used for a variety of applications such as moisture detection, semiconductors inspection or distinguishing different materials types. Besides the typical visible SWIR cameras, we offer SWIR cameras with the TEC cooling technology with the option of a fan. Using one of our Visible-SWIR lenses is highly recommend to pair with your Visible-SWIR camera. Our SWIR lenses in different focal lengths can be found here: SWIR lenses.

UV camera

Our UV cameras offer a new way of inspecting objects using ultraviolet light. Standard cameras are limited to the visible light spectrum or infrared and miss sensitivity in the lower wavelengths. Our cameras are equipped with the latest image sensors that are sensitive in the wavelength range of 200nm to 400nm. The capability of accessing lower wavelengths has made it possible to achieve inspections and analyses that would be otherwise impossible with standard cameras. Pairing them with our UV lenses ensures high quality imaging results.

Below is an overview of all of our models. You can also find more general information such as features and benefits of an industrial UV Camera at the bottom of this page.

CoaXPress camera

VA Imaging’s CoaXPress cameras are designed for high-speed imaging, making them suitable for demanding industrial and professional applications. With the CoaXPress (CXP) digital interface, you get efficient handling of high-speed vision data, making these cameras perfect for applications like machine vision, medical imaging, and more.

Streaming video camera

End of Life Products

The camera models in this category are EOL (end of life). This means that the cameras are not produced anymore. If you need a few pieces of a specific model, we still might have them available in our stock. Therefore contact us if you need one of these cameras, so we can check the stock. Also feel free to reach out for advise for the most suitable replacement.

Industrial cameras

Our industrial imaging cameras are available with USB2, USB3, GigE, 2.5GigE, 5GigE and 10GigE interfaces. The cameras are equipped with the latest image sensors from Sony, OnSemi, Gpixel and other well-known industrial image sensor manufacturers.

On the bottom of this page we discuss the industrial imaging camera interfaces VA Imaging offers, as well the pro and cons. If you need further support with selecting an industrial imaging camera, please contact us.
Lenses

C-mount lens

M12 lens

Telecentric lens

AFZ Varifocal

F-mount / M42 / M72

SWIR lens

Microscope lens

UV lens

Lens filters

Lens adapters

Lens calculator

C-mount lens

C-mount lenses stand out as one of the most common types of lenses for industrial applications. This is because of its standardized thread and the compact design, allowing it to easily combine with any of our industrial C-mount cameras. Our C-mount lenses are manufactured and designed to meet the high standards of durability and reliability, these standards are required to withstand harsh conditions such as those found in industrial environments. Featuring high optical performance and precise focusing, they deliver sharp images over an extended lifetime.

Almost all our C-mount lenses are available on our local Express stock. This means that they ready for immediate shipping after ordering. For high quantities of C-mount lenses, we also offer short delivery times. Need a special lens for your project? We also offer custom machine vision lenses.

M12 lenses

We offer M12 lenses / S-mount lenses designed for industrial cameras at competitive prices. All our M12 lenses support relatively large image sensors. The supported image sensor size varies between 1/2.5" to 2/3".
Our wide portfolio of M12 lenses start at a focal length of 1.85mm, offering a very wide angle solution for your application.
Do you need help selecting the most suitable M12/S-mount lens? Or if you cannot find an M12 lens in our webshop, please contact us. We can supply many other M12 lenses and have customized many lenses for specific applications of our customers.

Telecentric lens

A telecentric lens is used in applications where high accurate measurements are required. This is because a telecentric lens has reduced image distortion, constant magnification, high resolution, no perspective errors and no lens shading. This results in an image where the magnification, light intensity and distortion are uniform across the complete field of view.

With more than 100 options, our expansive portfolio of telecentric lenses offers a wide range of magnification and working distance options to suit diverse imaging needs. With customizable solutions, expert support, and our commitment to innovation, we help you achieve exceptional results in your machine vision application.

AFZ / Varifocal Lens

The use of a AFZ / Varifocal lens enables you to adjust the focal length of your machine vision system, making it suitable for a wide range of applications and products. Zoom lenses are available in both a manual and motorized version. Motorized zoom lenses feature multiple tiny integrated motors which control the lens by adjusting the focus, focal length, and/or aperture, depending on the specific model. It empowers the machine vision system by enabling adjustments to be made when conditions change or optimize the lens setup for different product types and sizes without the need for manual intervention.
To effectively control the motorized lens, we have developed a lens control board. This board enables you to control the motors (up to three) via USB or RS232 signal. Subsequently you can modify individual parameters and load one of the ten preset configurations.

F-Mount Lenses

We sell industrial lenses with F-mount / M42 mount / M72 mount developed for machine vision cameras. Image sensors up to 35mm and 4K line scan sensors are supported.
Our industrial F-mount / M42-mount / M72 mount lenses have better optical performance than consumer SLR lenses. Due to industrial grade, our lenses can withstand industrial conditions and are available for a long time. Use our lens calculator to determine the correct focal length for your F-mount / M42-mount / M72 mount lens, or get in contact to get expert advice on selecting the most suitable lens for your computer vision project.

SWIR Lens

A SWIR lens is used when you need to capture images across shortwave infrared (SWIR) wavelengths. A Visible+SWIR type of lens allows for the simultaneous imaging of scenes or objects in both SWIR and visible light which enables applications such as multispectral imaging, where information from different parts of the spectrum is utilized.

Our SWIR lenses are designed to match our SWIR Cameras. They come in different focal lengths, making it simple to choose the right one for your needs. Pairing them with our cameras ensures high quality imaging results.

Microscope lens

Microscope lenses allow precise inspection and analysis with a high magnification. Our microscope lenses consists of two parts and are carefully selected by us. By making this selection for you, we can ensure optimal image quality while keep distortion to a minimum.

The lens is designed for use with C-mount fittings and can be mounted directly to our machine vision cameras with a sensor size up to 1.1”. Our lenses are available in models that include a coaxial light input and models that do not include this extra light input.

The microscope lenses are compatible with our C-mount industrial cameras, enabling you to seamlessly convert an industrial camera into a digital microscope. Using microscope lenses allows you to capture high-resolution magnified images.

UV Lens

Our UV lenses offer a new way to inspect objects using ultraviolet light. Standard lenses are limited to the visible light spectrum or infrared and miss sensitivity in the lower wavelengths. Using the lower wavelengths it is possible to achieve inspections and analyses impossible with standard lenses. Our UV lenses are designed to match our UV Cameras. Pairing them with our cameras ensures high quality imaging results.

Below you have an overview of all our models. You can also find at the bottom of this page more general information about the UV Lenses. If you have any question, you can contact us.

Lens filters

Buy color and polarization lens filters for C-mount lenses and C-mount cameras to get more contrast in your machine vision application. At the bottom of the page you will find detailed information about the different color and polarization lens filters.
Not all our machine vision lensfilter are added as seperate products, therefore on this page you can customize your own lensfitler by selecting the desired bandwith and size.

Lens adapters

C-mount to M12 mount adapters, extension rings and focal length extenders for applications where standard lens solution are not providing the optimal field of view at the desired working distance. On the bottom of this page we explain how to use the different type of lens adapters like, C-mount to M12 mount adapter, extension rings and focal length extenders with M12 and C-mount lenses.

Lens calculator

Use the lens calculator to calculate the required focal length of the lens, based on your working distance and field of view.

Lenses

At VA Imaging we offer high-quality, affordable lenses for industrial image processing and we have a wide range of industrial lenses with different mounting options such as: C-mount, M12 mount, F-mount, M42 mount and much more.
We also offer a strong portfolio of specialized lenses such as: Telecentric lenses, SWIR, UV, Autofocus and Varifocal.
Beside our strong portfolio for all standard applications, we can supply special lenses and custom machine vision on request.
Accessories

Cables

Framegrabbers

Enclosures

Lens filters

Lens adapters

Accessories - mountingplates, powersupplies etc.

Cables

Cables for industrial cameras such as:

-   Screw lock cables for USB3 cameras
-   Screw lock cables for GigE cameras
-   I/O cables for machine vision
-   Screw lock cables for 10GigE cameras
-   Cables for Coaxpress cameras

All cables are compatible with our industrial cameras and fully tested by VA Imaging.
Beside the cables on our website we offer many custom cables in every length or connector needed, often with a MOQ of 1pcs. Contact us for the possibilites.

Framegrabbers CoaXPress, GigE Vision and USB3 VIsion

Framegrabbers for:

- Coaxpress interface
- GigE, 2.5GigE and 10GigE Vision
- USB3 vision

Connect multiple industrial cameras to a single PC, using our Framegrabbers. It is possible to combine multiple framegrabbers into a single PC, creating possibilities to connect many cameras to a single pc.

Enclosures

Our universal machine vision camera housings protects machine vision cameras against moisture and dust. The lens settings can no longer be adjusted by operators. The enclosure has been tested in IP67conditions with our GigE, USB3 and I/O cables. It is one of the most affordable machine vision camera housing on the market

Lens filters

Buy color and polarization lens filters for C-mount lenses and C-mount cameras to get more contrast in your machine vision application. At the bottom of the page you will find detailed information about the different color and polarization lens filters.
Not all our machine vision lensfilter are added as seperate products, therefore on this page you can customize your own lensfitler by selecting the desired bandwith and size.

Lens adapters

C-mount to M12 mount adapters, extension rings and focal length extenders for applications where standard lens solution are not providing the optimal field of view at the desired working distance. On the bottom of this page we explain how to use the different type of lens adapters like, C-mount to M12 mount adapter, extension rings and focal length extenders with M12 and C-mount lenses.

Accessories - mountingplates, powersupplies etc.

Accessories for industrial cameras and machine vision lighting, like mounting plates, powersupplies, tools and other accessories

Accessories

Accessories for industrial cameras such as:

-   USB2 cable screw lock
-   USB3 cable screw lock
-   GigE / 10GigE cable screw lock
-   I/O cable screw lock
-   PCIe card with 2x or 4x USB3 ports (USB3 HUB)
-   PCIe card with 2x or 4x POE GigE network ports
-   USB3, GigE, 10GigE, SPF+ and Coaxpress framegrabbers
-    Industrial camera enclosures
-   Machine vision camera mounting plates

All accessories are compatible with our industrial cameras and fully tested by VA Imaging.
Software

Daheng Imaging SDK

Zebra Aurora Vision image processing software

2ND Look recording software

Open Source software

Daheng Imaging SDK (software development kit)

Daheng Imaging has a SDK free of charge that works with all Daheng Imaging industrial cameras. It includes programming examples and a demo program with user interface to easily set parameters (like exposure time) of the industrial camera. All different versions of the SDK can be downloaded from the download area.

Zebra Aurora Vision image processing software

Our partner Zebra Technologies stands at the forefront of computer vision software. The well known Zebra Aurora Vision (previously known as Adaptive Vision) is a market leader for image processing software for industrial automation.
VA Imaging is the official distributor for this powerful computer vision software package. On this page you can find several available software packages as well as success stories. Get in contact to be advised on the best software solution for your machine vision project.

2ND Look recording software

IO Industries' 2ndLook software for Windows and Linux is a flexible, cost-effective tool designed to record video from industrial GigE and USB3 Vision cameras in either the factory or the research lab. Troubleshooting a manufacturing process and the recording of scientific experiments are common applications for this easy-to-use video recording software. With the H.264 encoder option, it's even possible to record H.264 streams from an industrial camera.

Open Source software

Open source software is software that is free to use. We provide a list of open source software packages that are compatible with our machine vision cameras.

Computer Vision Software

Industrial cameras are used in combination with computer vision software for image processing and to automate processes. Essentially, a single industrial camera on its own is not a complete machine vision system. The computer vision software communicates with the industrial camera to capture images. The software then uses algorithms to detect important characteristics for image processing. The possibilities are endless but a few examples of applications are product type detection, product positioning, shape recognition, measurements, OCR.
Lighting

Lighting

Machine Vision Lighting

Machine vision lighting refers to specialized lighting systems that provide the necessary illumination for the camera to capture high-quality images. Industrial lighting is a critical component for applications such as inspection, identification and measurement. It provides steady, constant light and you can choose from a variety of colours available which also makes it possible to achieve high contrast. All machine vision lighting is available on our online store, with quick delivery times. A selection of the most popular lights are available on our local express stock for immediate shipping. There is also the option to customize the lights, choosing between sizes and colours. Whether it's long-distance bar lights, ring lights, backlights or any other machine vision light, customization is possible.

Machine Vision Lighting

Machine vision lighting refers to specialized lighting systems that provide the necessary illumination for the camera to capture high-quality images. Industrial lighting is a critical component for applications such as inspection, identification and measurement. It provides steady, constant light and you can choose from a variety of colours available which also makes it possible to achieve high contrast. All machine vision lighting is available on our online store, with quick delivery times. A selection of the most popular lights are available on our local express stock for immediate shipping. There is also the option to customize the lights, choosing between sizes and colours. Whether it's long-distance bar lights, ring lights, backlights or any other machine vision light, customization is possible.
Custom

Custom

Custom machine vision products

Besides the standard computer vision product portfolio, We provide customized camera, lens and lighting solutions, already at low volumes and for fair prices. Some examples of customizations are, custom firmware, custom lens mount, custom connectors, fixed focus and fixes aperture lenses, custom size lights and custom wavelengths. We have also developed OEM machine vision lighting and controllers for customer specific projects.

If you can’t find a standard solution, please contact us and we can check if a customized camera, lens or light solution would be a fit for your project.

Custom machine vision products

Besides the standard computer vision product portfolio, We provide customized camera, lens and lighting solutions, already at low volumes and for fair prices. Some examples of customizations are, custom firmware, custom lens mount, custom connectors, fixed focus and fixes aperture lenses, custom size lights and custom wavelengths. We have also developed OEM machine vision lighting and controllers for customer specific projects.

If you can’t find a standard solution, please contact us and we can check if a customized camera, lens or light solution would be a fit for your project.