MER2-2000-19U3C-W90, IMX183, 5496x3672, 19fps, 1 inch, Rolling shutter, right angle (90), Color

MER2-2000-19U3C-W90 Camera USB3 Vision
MER2-2000-19U3C-W90
  • IMX183
  • 5496x3672
  • 19fps
  • 1 inch
  • Rolling shutter
  • right angle (90)
  • Color
€434,00
Tempi di consegna: Standard 3-6, Express 0-3 settimane
Garanzia di 3 anni
Certificato da TÜV Rheinland

Descrizione

Industrial USB 3.0 Vision camera with 90 degree head

The Mercury 2 USB3.0 camera is an industrial vision camera, with a USB 3.0 interface and a 90 degree camera head. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.
This industrial vision camera model is interesting for you when your application complies with the following conditions:
-    An industrial camera
-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)
-    Only one cable is required to connect the device
-    Compact dimensions due to 90 degree right angle head
-    Suitable for computers (x86) and embedded platforms: ARM V7 & ARM V8
-    Hardware triggering (I/O cable is required)

For more details about our industrial USB 3.0 vision cameras check our manual.

Altre informazioni

Specifiche

Numero di parte MER2-2000-19U3C-W90
Interfaccia della telecamera USB3 Vision
Risoluzione della telecamera 5496x3672
Frequenza fotogrammi della telecamera (fps) 19
Dimensione pixel della telecamera (um) 2.4
Telecamera Colore/Mono Color
Tipo di sensore della telecamera Sony IMX183
Dimensioni del sensore della telecamera 1"
Tipo di otturatore della telecamera Rolling Shutter
Tempo di otturazione della telecamera 12us~1s
Profondità di bit dell'ADC della telecamera 12bit
Vedi tutte le specifiche

Downloads

Hai bisogno del manuale di MER2-2000-19U3C-W90?

Hai una domanda su MER2-2000-19U3C-W90?

Facci la tua domanda tramite

MTBF, warranty & product life cycle

Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.

Industrial Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens
Compared to security cameras and webcams, an industrial color camera has larger and more light sensitve pixels. Providing you an excellent image quality.  

I/O port for hardwaretrigger, strobecontrol or PLC communication

The I/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I/O connector are provided in the manual. You can also check our article: hardware triggering multiple industrial cameras.

Numero di parte MER2-2000-19U3C-W90
Interfaccia della telecamera USB3 Vision
Risoluzione della telecamera 5496x3672
Frequenza fotogrammi della telecamera (fps) 19
Dimensione pixel della telecamera (um) 2.4
Telecamera Colore/Mono Color
Tipo di sensore della telecamera Sony IMX183
Dimensioni del sensore della telecamera 1"
Tipo di otturatore della telecamera Rolling Shutter
Tempo di otturazione della telecamera 12us~1s
Profondità di bit dell'ADC della telecamera 12bit
Profondità pixel della telecamera 8bit, 12bit
Guadagno digitale della telecamera 0dB~24dB
Formato dei dati pixel della telecamera BayerRG8 / BayerRG12
Sincronizzazione della telecamera Hardware trigger, software trigger
I/O della telecamera 1 opto-isolated input line and 1 opto isolated output line, 2 GPIO
Temperatura di funzionamento della telecamera. 0°C~45°C
Umidità di funzionamento della telecamera 10%~80%
Attacco per obiettivo della telecamera C
Dimensioni della telecamera 29x29x58.8mm
Telecamera SDK Windows / Linux / Android
Consumo energetico della telecamera <2.7W@5V
Peso della telecamera (g) 78
Conformità della telecamera RoHS, CE, FCC, USB3 Vision, Genicam
Megapixel della telecamera 20
Numero di parte vecchio MER2-2000-19U3C-W90
€434,00

Recensioni

Visualizza tutte le recensioni

Vision & Automation Resources

Vision & Automation Resources