MER2-280-139U3C, IMX421, 1936x1464, 139fps, 2/3", Global shutter, CMOS, Color

MER2-280-139U3C Camera USB3 Vision
MER2-280-139U3C
  • IMX421
  • 1936x1464
  • 139fps
  • 2/3"
  • Global shutter
  • CMOS
  • Color
€429,00
Delivery time: Standard 3-6, Express 0-3 weeks
Garantia de 3 anos
Certificado pela TÜV Rheinland

Description

Industrial USB 3.0 Vision camera

The Mercury2 USB3.0 camera is an industrial vision camera, with an USB 3.0 interface. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (model 4 or higher) or the NVIDIA Jetson family and for standard computers.
This industrial vision camera model is interesting for you when your application complies with the following conditions:
-    An industrial camera
-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)
-    Only one cable is required to connect the device
-    Compact dimensions (29x29x29mm)
-    Suitable for computers (x86) and embedded platforms: ARM V7 & ARM V8
-    Hardware triggering (I/O cable is required)

For more details about our industrial USB 3.0 vision cameras check our manual.

More info

Specifications

Part number MER2-280-139U3C
Interface USB3 Vision
Resolução 1936x1464
Frame rate (fps) 139
Tamanho do pixel (um) 4.5
Cor/Mono Color
Tipo do sensor Sony IMX421
Tamanho do sensor 2/3"
Tipo de shutter Global Shutter
Tempo de shutter 9us~1s
Profundidade de Bits ADC 10bit, 12bit
See all specs

Downloads

Need the MER2-280-139U3C manual?

Do you have a question about the MER2-280-139U3C?

Ask us your question via

MTBF, warranty & product life cycle

Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.

Industrial Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens
Compared to security cameras and webcams, an industrial color camera has larger and more light sensitve pixels. Providing you an excellent image quality.

I/O port for hardwaretrigger, strobecontrol or PLC communication

The I/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I/O connector are provided in the manual. You can also check our article: hardware triggering multiple industrial cameras.

If you don’t use the I/O port, it is possible to order the camera without I/O. For high volumes, this will reduce the cost price of the camera with € 10. The minimum order quantity for an industrial USB3 camera without I/O is 10 pieces. If you want to order the industrial USB3 camera without I/O, please contact us.

Part number MER2-280-139U3C
Interface USB3 Vision
Resolução 1936x1464
Frame rate (fps) 139
Tamanho do pixel (um) 4.5
Cor/Mono Color
Tipo do sensor Sony IMX421
Tamanho do sensor 2/3"
Tipo de shutter Global Shutter
Tempo de shutter 9us~1s
Profundidade de Bits ADC 10bit, 12bit
Profundidade de bits do pixel 8bit, 10bit, 12bit
Digital Gain 0dB~24dB
Formato de dados do pixel Bayer RG8 / Bayer RG10 / Bayer RG12
Sincronização Hardware trigger, software trigger
I/O 1 input and 1 output with opto-isolated, 2 programmable GPIOs
Temp. de operação 0°C~45°C
Umidade de operação 10%~80%
Montagem da lente C
Dimensão 29x29x29mm
SDK Software 3rd-party software such as HALCON, MERLIC and LabVIEW
Consumo de energia <3.4W@5V
Peso (g) 65
Conformidade CE, RoHS, UL, USB3.0 Vision®, GenICam®
Megapixel 3
Número antigo do produto MER2-280-139U3C
€429,00

Avaliações de câmeras industriais

Ver todas as avaliações

Vision & Automation Resources

Vision & Automation Resources